The holes for the
tube drives must
face the inside of
the table
3
The holes for the
tube drives must
face the inside of
the table
2
Page 3 OF 9
K&A Manufacturing
6703 Zinser Street Schofield, WI 54476
Phone: 800.298.4351
Fax: 866.882.9475
www.raproducts.com
Instruction # 53244
The drawing below shows how to distinguish the left leg A from the right leg B.
Leg A Left Leg
Leg B Right Leg
WARNING!
Cylinders inside the leg assemblies are under pressure
Stand clear of the leg assemblies when removing the screws in Step 11.
Read the instructions thoroughly and complete the assembly before
removing the screws.
Warranty Information:
NewHeights™ products are warranted to be free of defects due
to manufacturing or materials as follows: Two years on the gears. Five years on the
support brackets, aluminum columns, and feet. We will replace any defective part after
inspection by an authorized agent. Costs incurred due to product replacement such as
installation labor and transportation are not covered under this warranty. When
corresponding with RightAngle™ products, provide the model and serial numbers
located on one of the leg assemblies.
