Right Weigh 201-219-11, Руководство по установке и эксплуатации

Страница: 15 / 32

SETTING SECURITY PIN CODE
15
Adding a security PIN will prevent tampering with the gauge. Once set, the
PIN will be required to change calibration data and to change the PIN code.
With the gauge off, hold both the
C LOW and C HIGH buttons,
then press the ON/OFF button
and release all three.
Press the MENU button and
“00000” will display on the screen.
Enter a 5 digit PIN code using the
1, 2, 3, and 4 buttons. Press the
MENU button again to save the
code.
**If the display shows “-----”, then
there is already a code set. See
next page to change existing PIN
code**
PRESS
HOLDING
PRESS