Once the Test Sequence has been opened, individual tests can be inserted by
highlighting the place where a new test needs inserting using the up and down keys.
Note; Tests will be inserted before the highlighted position not after.
To modify a test sequence, please refer to 3.1.3
3.2.
Asset Trace Variables
The Asset Trace Variables allow the user to include valuable data to the test results to
enhance the traceability and to provide increased search criteria when using database
software. Asset trace variables may consist of a maximum of 25 characters and can be
selected prior to each test when using the Rigel BP-SIM in automatic mode.
The following variables can be added to the test results:
The default settings on the Rigel BP-SIM include the Site and Location variables. Both
are activated. The drop down box is set to [Yes].
To activate or de-activate each variable, use the up and down keys to select the
variable and the left and right keys to select yes or no.
Once a variable has been activated, the user is given the ability to enter Trace
Variables prior to a safety test by selecting from or adding to the list of default items.
Operating Instructions
Rigel BP-SIM
24
