15W3lLeds Wall Washer
11
11. MAINTENANCE AND CLEANING
The following points have to be considered during the inspection:
1.
All screws for installing the devices or fixturets of the device have to be tightly
connected and must not be corroded.
2.
There must not be any deformations on the housing .color lenses, fixations and
installation spots.
3.
Mechanically moved fixturets must not show any traces of wearing and must not
rotate with unbalances.
4. The electric power supply cables must not show any damage, material fatigue or
sediments.
Further instructions depending on the installation spot and usage have to be adhering by a
skilled installer and any safety problems have to be removed.
In order to make the fixture in good condition and extend the life time .we suggest a regular
cleaning to the fixture
1.
Clean the inside and outside lens each week to avoid the weakness of the lights
due to accumulation of dust.
2.
A detailed electric check by approved electrical engineer each three months,
make sure that the circuit contacts are in good condition, prevent the poor
contact of circuit from overheating.
We recommend a frequent cleaning of the device please use a moist , lint-free cloth .
Never use alcohol or solvents
There are no serviceable fixturets inside the device please refer to the instructions under
“installation instructions”.
