15W3lLeds Wall Washer
9
what allows DMX to function properly. The DMX address of a fixture is what allows it to
communicate with a controller properly. The DMX addressing also allows the fixture to
ignore any DMX information coming from the controller that is not meant specifically for the
fixture. Because each fixture is connected in a daisy-chain fashion it is imperative to assign
a proper and unique starting DMX address to each and every fixture. The DMX address is
non-destructive and will remain in the fixture’s memory even when the power to the unit is
switched off. Memory is backed-up and retain by an internal power source .
9.2 dn--
This mode include two DMX channel modes,
dn.00
and
dn.01.
dn00:
standard DMX channel mode (3 / 6 /12 DMX channel)
dn01:
Base DMX channel mode (3 DMX channal)
9.3 Manual Mode
This function is used to set the mixed color by manua. Including of
rL--,gL--,bL--,EL--
four parts.This setting will store in the build-in menmory.You can use this setting next time
without reset.
9.4 Automatic Mode
This function including
FLAS,FADE,ACS-,
CE--,CS--
,five modes,which allows the
internal programs to run in either stand-alone or master-salve mode. In
CS--
mode,this you
can run the different build-in effect.
CS--
adjust the CE--speed.
9.5 Sound Control Mode
This function allows you to control the fixture via the sound with two different effect.
9.6 Synchronization mode (Master-slave mode)
In “Master” mode the fixture will send DMX data to other fixtures connect via the DMX
chain. Please follow this way to set Master-slave mode:
Synchronous operation setting (no console)
Host:
in the
FLAS,FADE,ACS-,
CE--,CS--,SOUA,SOUF
mode.
Slave:
address setting is
"d.001"
.
Synchronous operation set (console mode)
Host:
in
dn-- / ADDR
mode
Slave:
address setting is
"d.001"
.
