RGBW 4IN1 10W7Leds Indoor Par Can
7
8.2 Automatic Mode
This function including
FLAS,FADE,ACS-
,three modes,which allows the internal
programs to run in either stand-alone or master-salve mode.
8.3 Sound Control Mode
This function allows you to control the fixture via the sound with two different effect.
8.4 Synchronization mode (Master-slave mode)
In “Master” mode the fixture will send DMX data to other fixtures connect via the DMX
chain. Please follow this way to set Master-slave mode:
Master:
Automatic Mode or Sound Control Mode
Slave:
address setting is
"d001"
.
9. DMX CHANNEL TRAITS
Channel Value Function
CH1
0-255
Total Dimmer (0-100%)
CH2
0-255
Red dimmer (0-100%)
CH3
0-255
Green dimmer (0-100%)
CH4
0-255
Blue dimmer (0-100%)
CH5
0-255
White dimmer (0-100%)
CH6
0
Close
1-255
Strobe effect (slow-fast)
CH7
0
Close
1-255
Color fade effect (slow-fast)
CH8
0
Close
1-255
Color jump change effect (slow-fast)
CH9
0
Close
1-128
Sound active mode (color jump change)
129-255
sound active mode (flash)
10. MAINTENANCE AND CLEANING
10.1 The following points have to be considered during the
inspection:
2. All screws for installing the devices or parts of the device have to be tightly
connected and must not be corroded.
3.
There must not be any deformations on the housing .color lenses, fixations and
installation spots.
4. Mechanically moved parts must not show any traces of wearing and must not
rotate with unbalances.
5. The electric power supply cables must not show any damage, material fatigue or
sediments.
Further instructions depending on the installation spot and usage have to be adhering by a
skilled installer and any safety problems have to be removed.
In order to make the fixture in good condition and extend the life time .we suggest a regular
Guangzhou
Geliang
Lighting
Technology
Co.,Ltd
