14
To attach seat and backrest unit to base,
slide seat hoop (C) under prongs (D) on
base, centering backrest column between
prongs. Then lower seat onto frontbar (B),
pushing fi rmly downwards on front edge
until it snaps into place (see Figures 12b
and 12c).
Reconnect footboard adjustment tubing to
its housing by holding housing and tubing
in straight line to one another, depressing
tube latch, inserting tubing into housing
and making sure it clicks into place at
desired setting (see Figure 12a).
Note:
The process of detaching
seat from base and re-attaching it
to another base works best when
performed with two people, one on
either side of chair.
WARNING
Make sure seat is fi rmly attached, front
and back, before use.
Seat quick-connect continued. . .
