7
Adjusting headboard:
(see Figure 6a)
Position headboard by raising it and sliding
cleat (A) into the frame slot. Tighten cleat
knob (B). If headboard is not needed,
slide cleat up, tighten knob, and fold the
headboard down.
Adjusting head blocks:
Loosen the two knobs on the clamp, slide
the block to the desired position, and
tighten knobs securely.
Footboard
To prevent falls,
ensure the footboard
is in place before tilting the client to a
vertical position.
To prevent pinching or crushing, correctly
position the footboard at the appropriate
height before placing the client on the
footboard.
To prevent injury, lock all four casters at
all times, regardless of whether or not
the product is occupied, except when
moving the stander from one location to
another.
Attaching sandals:
(see Figure 7a)
Either large or medium sandals can be
attached to the footboard.
1. Insert carriage bolts with bushings
through the bottom of the footboard.
2. Insert sandal base onto bolts and adjust
sandal before tightening knobs (A)
securely.
3. Place sandal onto base and lock into
place with latch (B).
WARNING
Figure 7a
B
B
A
A
