Riftek RF627 Series, Руководство пользователя

Страница: 110 / 130

110
Laser Scanners
RF627, RF627Smart [Revision 2.1.2] 20.09.2021
The search for a template in a profile is based on a sequential check of self
constraints and relative constraints for the elements of the profile approximation. The search
starts for the first variant, and if at least one constraint is not met, the check stops and the
next variant will be checked. If the last variant of the template is reached and the template is
not found, it is considered that the template was not found in the profile. The “det” output of
the block will be set to “FALSE”, the outputs of the block will have invalid values of the
segments (or arcs - in the future).
If each element of the template meets the constraints, the template is considered
found. The “det” output of the block will be set to “TRUE” and the block outputs will receive
data about segments (or arcs - in the future).
32.3. Template editor
32.3.1. Description of interface elements
To open the template editor, you need to open the parameters of the "template
detector" smart block and click the Edit button.
A modal window of the visual template editor built into the web interface will appear:
The template editor window is divided into the following functional areas:
1 - The area intended for displaying the template and setting its parameters.
2 - The area containing common controls.
3 - The area intended for visualizing a template and its constraints, visualizing a
profile and displaying the template detection results for the current profile, and selecting the
elements to be edited.