Unit is set to the same ID as a
system nearby.
Change the ID of your units by following the
instructions in
HOW TO SET THE
WIRELESS INTERCONNECTION
FUNCTION
. Make sure to turn power off to all
units before changing the switch positions.
Wireless Interference.
Move the other units to a new location.
CO Alarm sounds frequently
even though no high levels
of CO are revealed in an
investigation.
The CO Alarm may be
improperly located.
Relocate your alarm. If frequent alarms continue,
have home rechecked for potential CO problems.
You may be experiencing an intermittent CO
problem. Refer to
“
WHERE TO INSTALL
THIS ALARM
”
.
The horn sounds 3 quick
“chirps” every minute.
Malfunction signal. CO Alarm
needs to be replaced.
CO Alarms under warranty should be returned to
manufacturer for replacement.
The horn sounds 2 quick
“chirps” following with 1
long “chirp”.
Malfunction signal. CO Alarm
needs to be replaced.
CO Alarms under warranty should be returned to
manufacturer for replacement.
For your records, please record:
Date Purchased:
Where Purchased:
Data Installed:
Replacement data is 5 years after installation:
NOTE:
End of Life Signal — Once the unit reaches the end of its lifecycle, the
MALFUNCTION SIGNAL
will
sound once a minute to indicate the need to immediately replace the Alarm.
Manufacturer:
Xiamen Vs-Top Electronics Co., Ltd.
2nd floor, No-107 Xiaguang Road, Xinyang Industrial District, Haicang ,Xiamen, China.
Tel: 0086-592-6017700 Fax: 0086-592-6017711
E-mail:
Website:
www.orientalert.com
This apparatus is designed to protect individuals from the acute effects of carbon monoxide exposure. It will not
fully safeguard individuals with specific medical conditions. If in doubt consult a medical practitioner.
