12 Manufacturer’s Guarantees
The manufacturer guarantees conformity of the annunciator to it’s
Technical Specifications provided that the transportation, storage,
installation and operation conditions are observed.
12.2 The guaranteed shelf life of the annunciator is 63 months
since the date of manufacture.
12.3 The guaranteed useful life is 60 months since the day of
putting into operation within the guaranteed shelf life.
12.4 The annunciators that are found non-conforming to the Tech-
nical Specifications shall be repaired by the manufacturer, provided
the installation and operation rules have been complied with.
Note
–
Warranty obligations are not applied to the power-supply
batteries.
13 Acceptance and Packing Certificate
«Trubach-RK» wireless sound alarm annunciator ,
batch number_________________,
has been manufactured in compliance with the active technical
documentation, classified as fit for operation and packed by «RIELTA»
JSC.
Person responsible for acceptance and packing
QC representative_________________ __________________.
Date, month, year
Table 4
LED indication
Communication
Quality
Appraisal
Recommendations
Color
Mode
Green
Three blinks
Excellent
Install the
annunciator at this
place
Green
Two blinks
Good
Green
One blink
Communication
established
Choose another
place for installation
or use a repeater*)
Red
A series of
blinks
No communication
*) – «Ladoga BRSS-RK-RTR» or «Ladoga BRSS-RK-RTR» ver. 1
10 Features and Recommendations
10.1 The annunciator is powered on and off by installation and
removal of the main and the backup power-supply batteries.
10.2 In case of main power-supply low-battery, the annunciator
switches to the backup one. The annunciator does not operate when
the main power-supply battery is not installed.
10.3 Replace both batteries if any of them is discharged.
10.4 The installed power-supply batteries must be of the same
type. The backup battery should be installed first.
In case the CP is disabled for a long time, it is recommended to
power off the annunciator.
11 Storage and Transportation
11.1 The annunciator in their original packaging may be transported
by any means of transportation in closed vehicles over any distances
in compliance with the existing shipping rules concerning the
respective means of transportation.
11.2 The storage premises should not contain any current-
conducting dust, acid and alkali fumes, or corrosive or destroying
insulation gases.
«RIELTA» JSC, www.rielta.ru,
Chapaeva Str. 17, Saint Petersburg, Russia, 197101, [email protected],
Tel./fax. +7 (812) 233-0302, 703-1360,
Technical support, tel. +7 (812) 233-29-53, 703-13-57, [email protected]
Made in Russia
Rev. 0 of 12.01.15
No. 00108
V.2
