Riello RS 200/E LN, Инструкции по установке, использованию и обслуживанию

Страница: 32 / 35

20008113 30
GB
Maintenance
6.3 Opening the burner
Disconnect the electrical supply from the burner.
In order to open the burner, proceed as follows:
³
loosen the 4 screws 1) (Fig. 36) and remove the hood 2);
³
install the 2 extensions 9) on the guides 4) and re-screw the
screws 8);
³
remove the screws 3) and pull back the burner on the guides
4) of about 4”;
³
disconnect the electrode lead, then unthread the burner com-
pletely from the guides;
³
remove the screw 6) and extract the inner part 5) of the head.
6.4 Closing the burner
In order to close the burner, re-install all components with re-
verse procedure:
³
remove the 2 extensions 9) and re-screw the screws 8) on the
guides 4) ;
³
push the burner up to approximately 4” from the pipe cou-
pling;
³
reinsert the electrode lead and slide the burner as far as the
stop.
³
fix the screws 3) to secure the burner to the combustion head;
³
fix the 4 screws 1) to install the hood 2).
Connect the electrical supply from the burner.
DANGER
Fig. 36
D9271