Riello RS 100, Инструкции по установке, использованию и обслуживанию, Страница: 4 / 80

2
6461
GB
Contents
Section Page
1
Information and general warnings 3
1.1 Information about the instruction manual 3
1.2 Guarantee and responsibility 3
2
Safety and prevention 4
2.1 Introduction 4
2.2 Personnel training 4
3
Technical description of the burner 5
3.1 Burner designation 5
3.2 Models available 5
3.3 Burner categories - Countries of destination 5
3.4 Technical data 6
3.5 Electrical data 6
3.6 Burner weight 6
3.7 Overall dimensions 7
3.8 Firing rates 8
3.9 Burner components 9
3.10 Burner equipment 9
3.11 Control box for the air/fuel ratio 10
3.12 Servomotor 10
4
Installation 11
4.1 Notes on safety for the installation 11
4.2 Handling 11
4.3 Preliminary checks 11
4.4 Operating position 12
4.5 Securing the burner to the boiler 12
4.6 Combustion head adjustment 14
4.7 Assembly of the gas train 15
4.8 Gas feeding line 16
4.9 Electrical wiring 17
4.10 Calibration of the thermal relay 18
5
Start-up, calibration and operation of the
burner
19
5.1 Notes on safety for the first start-up 19
5.2 Operations before start-up 19
5.3 Burner start-up 20
5.4 Burner ignition 20
5.5 Burner adjustment 20
5.6 Operation sequence of the burner 23
5.7 Burner flame goes out during operation 23
5.8 Stopping of the burner 23
5.9 Measuring the ionisation current 24
5.10 Checking the air and gas pressure on the com-
bustion head
24
5.11 Final checks (with burner operating) 24
6
Faults - Probable causes - Solutions 25
6.1 Normal operation / flame detection time 26
7
Maintenance 27
7.1 Notes on safety for the maintenance 27
7.2 Maintenance programme 27
7.3 Opening the burner 28
7.4 Closing the burner 28
A
Appendix - Electrical panel layout 29
B
Appendix - Accessories (on request) 35
C
Appendix - Gas supply pressure 37
D
Appendix - Firing rate on basis of air density 38