5832
5
HEAVY OIL SUPPLY LINE
RING SUPPLY LINE
(for heavy oil with viscosity up to 50°E at 50°C)
1
- Tank (heated for heavy oil)
2
- Filter (with resistance for oil > 7°E at 50°C)
3
- Forwarding pump
4
- Control manometer
5
- Shutter valves (in couple) excluding the burner
6
- Burner (provided for Kit for heavy oil code no. 3000721)
7
- Pressure adjuster
8
- Filter (with resistance for oil > 7°E at 50°C)
9
- Burner pump
WARNING
- The oil could easily flow through the pipes if those are properly seized, protected and heated (by electricity, steam
or hot water).
- The forwarding pump capacity should be at the least double of that of the burner pump.
- If several burners are supplied through the same ring supply line, the forwarding pump should have a capacity of
approx. 30% more than the sum of the single burners outputs.
- For starting-up: after excluding the burner by the shutter valves (5) let the oil flow into the supply ring up to reach
the required circulation; after than open the valves and supply normally the burner.
GRAVITY SUPPLY LINE
(only for oil with max. viscosity up to 7°E at 50°C)
Notice: before placing the burner in operation, ensure that the return line is open. Any obstruction may damage the
pump seal.
H
meters
L meters
ø 1”
ø 11/4”
0
2
10
0,5
3
11
1
4
12
1,5
5
13
2
6
14
Pump priming
Loose the tap of the vacuometer plug
(6) (fig. 1) and wait for the oil flow.
H
= Difference in the pipes height
L
= Total length of the suction tube
Содержание P200 T/N
Страница 2: ......
