Riello Multipass 10A, Руководство пользователя, Страница: 3 / 13

14
1 INTRODUCTION AND SAFETY
1.1 Introduction
Thank you for choosing our product.
The manufacturer is particularly specialised in the development and manufacture of uninterruptible power
supplies (UPSs) and related accessories.
This manual contains detailed instructions for installing and using the BYPASS.
To get maximum performance from your device, please read and follow the instructions described herein.
Keep this manual close to the BYPASS.
© Reproduction, even partial, of any part of this manual is forbidden unless authorised by the manufacturer.
For improvement purposes, the manufacturer reserves the right to change the product described at any time
without notice.
1.2 Precautions and safety rules
This part of the manual contains the precautions to be followed closely as far as SAFETY is concerned.
a) The device must always be earthed during use. Do not remove the plug from the power supply as
this would disconnect the safety earth for all devices powered.
b) The BYPASS has HAZARDOUS electrical voltages inside it. Any maintenance must ONLY be
performed by trained personnel.
c) Do not connect the neutral output to the neutral input or to earth as this may damage the UPS
connected to the BYPASS itself.
d) The output outlets may be live even if the UPS is not connected to the mains.
e) Do not allow water, liquids in general and/or other foreign objects to get inside the BYPASS. Do not
expose the device to direct sunlight or heat sources.
f) The separable power cable is intended as a sectioning device. Be sure to leave adequate free space
near the cable connection for easy disconnection.
g) Observing the neutral and phase indications relating to plugs and outlets, the BYPASS inserted in a
system does not change the existing neutral system.
h) Do not connect the UPS to plugs or outlets other than the dedicated ones on the BYPASS. Incorrect
installation could cause malfunctions or failures of the UPS and the load connected to it.