Riello MULTI SENTRY MST 100, Руководство пользователя

Страница: 21 / 56

H
OOKUP INSTRUCTIONS
Follow the instructions below in order:

open the door

Depending on model: remove the terminal/bar cover ( see "Switches view" )
MST 125: to remove the bar cover, first remove the handles of the
SWIN, SWOUT, SWBYP and SWMB switches by undoing their screws
as shown in the image.

connect the protective conductor (ground cable) to the PE marked screw.

Depending on model: connect the input, bypass (if present), output and battery cables to the terminals/bars; follow the
hookup indications in
"UPS connections view" . Connect the N BATT, N INPUT, N BYPASS (if present) and N OUTPUT
cables to the neutral bar.
Note: PE M6 screw, N M8 screw
Example image (purely illustrative)
The input and bypass Neutral must always be connected.
The input and bypass lines must be connected to the same potential as of the Neutral.
 Once you have completed the installation and checked the connections (see “First power on and initial settings”), restore
the terminal/bar cover.
MST 125: Restore the switch handles.

Close the door.
Once installation operations have been completed and connections verified (see paragraph "
First start-up and initial settings" ),
restore the terminal cover panel and close the door.