Riello Hi, Comfort T100, Инструкция по установке и эксплуатации

Страница: 119 / 376

119
IT
A
LIA
NO
FRA
NÇAIS
ES
PAÑOL
POLS
K
I
ROMÂNĂ
ENGLIS
H
to confirm.
The boiler RF receiver auto-configures
to normal operating mode.
9
The light indicators on the boiler
RF receivers could differ from what
is indicated in section "4 Alarms
and operating statuses" to page
121
9
This may take up to 2 minutes,
after which the Hi, Comfort T100
automatically returns to the HOME
screen.
Should the link not be successful, please
contact the Authorised Service Centre.
NOTE
When replacing the WiFi Box it is nec-
essary to repeat the linking again be-
tween the boiler RF receiver and the
WiFi box.
Linking the RF receiver to the
Hi, Comfort T100
The Hi, Comfort T100 programmable
thermostat can be linked to a wireless
receiver if you want to replicate the re-
lay functionality on the thermostat in
a remote zone (e.g. zone valve), which
is not accessible with a cable (wireless
access).
Follow the procedure below to link
them:
Press the prismatic dome clear LED but-
ton on the boiler RF receiver and hold
for 5 seconds until the green and red
LEDs slow flash (1 seconds) at the same
time (once linked the flash returns to
normal).
9
The light indicators on the boiler
RF receivers could differ from what
is indicated in section "4 Alarms
and operating statuses" to page
121
From the Hi, Comfort T100 HOME
screen, press the ESC/MODE button and
hold for 5 seconds to display the follow-
ing (alternating) information:
ESC
MODE
EXAMPLE OF LINKED HI, COMFORT T100
SET
PROG
RESET
ESC
MODE
2
1
3
4
1 Channel (usually 11)
2 Address (usually 00)
3 Thermostat ID (unequivocal, also
shown on the app/server)
4 number of the thermostat as-
signed by the WiFi Box (in the event
of several linked thermostats) –
identifying the zone.