background image

39 

 

I

NTRODUCTION

 

Thank you for choosing our Uninterruptible Power Supply (UPS). 

Our company is highly specialised in the development and production of uninterruptible power supplies (UPS). 
The UPS in this range are high quality products, designed and built with care to ensure optimum performance. 
This equipment can be installed by anyone, subject to a 

CAREFUL AND THOROUGH READING OF THIS 

MANUAL. 

This manual contains detailed instructions on how to use and install the UPS.  

For information on using and getting the best performance from your UPS, this manual should be kept 
safely near the UPS and CONSULTED BEFORE TAKING ANY ACTION.

 

 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
© Reproduction of any part of this manual, partial or in full is strictly prohibited without the manufacturer’s prior consent. The 
manufacturer reserves the right to modify the product described herein, in order to improve it, at any time and without notice. 
Microsoft, Windows, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United 
States and/or other countries.

 

Содержание DVD 150



































Отзывы: