Riello BGK3, Инструкции по установке, использованию и обслуживанию

Страница: 11 / 60

9
20013962
GB
Technical description of the burner
4.6 Burner description
One stage light oil burner with low pollutant emissions (Nitric Oxide NOx, Carbon monoxide CO and unburnt Hydrocarbons).
1 Oil pump
2 Air damper adjustment assembly
3 Nozzle holder assembly
4 Flange with insulating gasket
5 Control box
6 Reset button with lock-out lamp
7 Amplified photoresistance
8 Combustion head
9 Recirculation pipe
10 Motor
11 Capacitor
4.7 Burner equipment
Flange with insulating gasket .............................................. No. 1
Screws and nuts for flange to be fixed to boiler................... No. 4
Screw and nuts for flange.................................................... No. 1
Flexible oil pipes with nipples .............................................. No. 2
Remote reset connection.....................................................No. 1
7 pin plug .............................................................................No. 1
Recirculating pipe ................................................................No. 1
Instruction and spare part list...............................................No. 1
4.8 Accessories
4.8.1 Diagnostic software kit
A special kit is available that detects the life of the burner through
optical connections with a PC showing the duty hours, number
and types of lockout, control box serial number etc...
Do the following to display the diagnostic:

Connect the kit supplied separately to the appropriate soc-
ket on the control box.
The information is read after the software program in the kit
is booted.
Fig. 3
D9577
2
7
6
1
3
10
5 9
4
8
11