Operating instruction
Heating Division
FIRMWARE UPDATE FOR TOUCH SCREEN
ARRAY 2.0
PAGE
6
REV
.
N°1
Riello SpA - Riello Proprietary and Confidential
After the firmware has successfully been updated, the touchscreen will reboot
automatically.
During rebooting unplug the USB stick from the touchscreen, otherwise the
firmware-update process will start again (the window displayed at Step 6 - Fig. 2 will
appear again).
NOTE
If an error appears on screen during the update-process, power OFF the
touchscreen, wait a few seconds and power it back ON to retry.
WARNING
This instruction is referred only to the models listed on chapter 1.
Don’t use this instruction or the firmware here mentioned for other
Riello boilers. It may cause an irreversible damage of the device.
