Riello ALUDOMUS SOLAR KV/200 20 ISC SOLAR, Руководство пользователя

Страница: 27 / 32

27
ENd USER
When an error
n
occurs, press the key (6) to display
the error message. The message on the display descri-
bes the cause of the error.
If an error occurs, an alarm may also activate a suitably
configured Qx... relay.
This parameter resets the alarm relay.
N° Description
6710 Alarm relay reset
The difference between the setpoint and the current
temperature is monitored. If this difference persists for
longer than the time set here, the system generates an
error .
N° Description
6740 CH flow 1 temperature alarm
6741 CH flow 2 temperature alarm
6743 Boiler temperature alarm
The controller memorises the codes and dates for the
last 10 errors.
N° Description
History . . .
ERROR TABLE
Error code Description
0 No error
10 Outside sensor
20 Boiler temperature sensor 1
25 Solid fuel boiler temperature sensor (not used)
26 Flow manifold temperature sensor
28 Flue gas temperature sensor
30 CH flow 1 sensor
32 CH flow 2 sensor
38 Primary controller flow temperature sensor
40 CH return temperature sensor 1
50 DHW 1 temperature sensor (*)
52 DHW 2 temperature sensor (*)
57 DHW circulation pump temperature sensor (*)
60 Room temperature sensor 1
65 Room temperature sensor 2
68 Room temperature sensor P
70 Storage cylinder temperature sensor 1
71 Storage cylinder temperature sensor 2
73 Solar collector temperature sensor 1
81 LPB short circuit
82 LPB address conflict
83 BSB short circuit
84 BSB address conflict
(*) Only with a remote storage cylinder
ROOM UNIT: CONTROL OF SOLAR SYSTEM AND ANY ADDITIONAL SYSTEMS INSTALLED AS ACCESSORIES
Error
30: Flow sensor 1
Attention
3: Maintenance interval exceeded
6
6