Riello 20142443 Скачать руководство пользователя страница 7

7

HOW TO SET THE DESIRED ROOM TEMPERATURE

Press PROG to enter the values of programming menu

Press the   button (3) or the   button (1) to scroll up to 

T1 - T2 - T3 heat 

T3 - T2 - OFF cool 

To set the desired room temperature levels: 

T1 - T2 - T3 heating

Press the PROG button (2) again to enter the 

menu and proceed to set the desired values. The 

3 values can be changed individually with the   

(8) and   (10) buttons when the respective ‘T’ 

value is active on the thermostat.

To scroll through to the desired setting (T1-T2 

or T3) use the   (3) or the   (1) buttons. To 

change the value use the 

 (8) and    (10) 

buttons. Press the PROG button (2) to enter and 

return to the programming menu, press MODE 

button (9) to enter and exit from the programming 

menu or wait 5 seconds to auto exit.

The temperature selection is related to the following range:

T1 heating < T2 heating < T3 heating

Attention: T3 heating ≤ T3 cooling -3 °C (5 °F) < T2 cooling, therefore if you are not able to increase 

the T3 heating it means that you need to increase the T2, T3 cooling with the dedicated procedure

To set the desired room temperature levels:

T2 - T3 cooling

Press the PROG button (2) again to enter the 

menu and proceed to set the desired values. The 

3 values can be changed individually with the   

(8) and   (10) buttons when the respective ‘T’ 

value is active on the thermostat.

To scroll through to the desired setting (T2 or T3) 

use the   (3) or the   (1) buttons. To change 

the value use the   (8) and   (10) buttons. 

Press the PROG button (2) to enter and return to 

the programming menu, press MODE button (9) 

to enter and esc from the programming menu or 

wait 5 seconds to auto exit.

The temperature selection is related to the following range: T2 cooling > T3 cooling

Attention: T3 h3 °C (5 °F) ≤ T3 cooling -3 °C (5 °F) < T2 cooling, therefore if you are 

not able to decrease the T3 cooling it means that you need to decrease the T3, T2 heating with 

the dedicated procedure

DEFAULT VALUE

COOL

T2 COOL

81 °F/27.2 °C

T3 COLL

75 °F/23.8 °C

HEA

T

T3 HEAT

70 °F/21 °C

T2 HEAT

61 °F/16 °C

T1 HEAT

41 °F/5° C

Relation T3 HEAT= T3 COOL - 5 °F (3°C)

Содержание 20142443

















Отзывы: