Riello 20142443, Быстрый старт

Страница: 6 / 16

6
FUNCTIONS/ICONS
Low
batteries
Batteries must be replaced.
Functionality will be impaired if
batteries become depleted.
Flame
Signal of real flame presence
on the boiler if OTBus
connection or just a heating
request in the ON/OFF
connection.
RF
communi-
cation
Radio frequency (RF)
communication ON with the
WiFi Box or boiler RF receiver.
Heating
mode
Heat.
Cooling
enable
Cool.
AUTO
Heat/Cool.
In this mode the device,
depending on the room
temperature value and the
temperature bands set for
heating and cooling, will
activate cooling rather than
heating. In particular:
if Tamb> Tx, cool (x = 2, 3), a
cooling request will be triggered
If Tamb <Tx, heat (x = 1, 2 or
3), a heating request will be
triggered
If Tx, heat <Tamb <Tx, cool, no
request will be made because
the temperature meets the
conditions.
(Tamb = Ambient Temperature)
Heating
mode in
OTBus
Heating mode enabled (only
if the OTBus is connected to
the boiler).
NOTE: flashing when the
boiler pump running
Domestic
hot water
(DHW)
Domestic hot water mode
enabled (only if the OTBus is
connected to the boiler).
1
2
3
8
9
10