Riello 20074479, Инструкции по установке, использованию и обслуживанию

Страница: 19 / 28

5 2916224 GB
Installation
Insert the converter in the special support 1)(Fig. 6) and fix it with
the two screws and brackets supplied with the kit.
Remove the cover of pressure switch 2)(Fig. 6) and loosen the
two fixing screws until you get the space necessary to insert the
bracket 1)(Fig. 6), hooking it to the screws themselves. During this operation it is necessary to pass the pressure switch
wire inside the slot 3)(Fig. 6).
Disconnect the plug “A” on the burner connection (to keep, nec-
essary for the operation without kit).
Connect the plug “B” of the converter to the relative socket on the
burner. See the wiring diagram in Fig. 6.
Insert the converter in the special support 1)(Fig. 7) and fix it with
the two screws and brackets supplied with the kit. Connect the plug of the converter to the relative socket on the
burner.
See the wiring diagram in Fig. 7.
Code 3010410
Fig. 6
20091804
Segnale in
ingresso
4-20 mA / 0-10 V
2
3
1
20091802
Code 3010415
Fig. 7
D3936
1
Signal on
input
4-20 mA / 0-10 V