Riello 20017207, Инструкция по использованию, установке и обслуживанию

Страница: 5 / 20

5
ENGLISH
The operation of any appliance that uses electrical power demands that a number of fundamental safety precautions
be respected. In particular:
b
Check that the product is complete and undam-
aged as soon as you remove it from its packaging.
Contact the
THERMITAL
reseller from whom you
purchased the product if you notice any problems.
b
This product must be installed by a legally qualified
heating engineer. (In Italy heating engineers are
regulated by law no. 37 of the 22/01/2008.) On com-
pletion of the installation, the installer must issue the
owner with a declaration of conformity confirming
that the installation has been completed to the high-
est standards in compliance with the instructions
provided by
THERMITAL
in this instruction manual,
and that it conforms to all applicable laws and stand-
ards.
b
This control panel is designed and made for use with
boilers generating hot water up to 110°C, and must
be used exclusively for this purpose and within its
specified performance limits.
b
The manufacturer declines all responsibility, con-
tractual or other, for damage to property or injury to
persons or animals caused by improper installation,
adjustment, maintenance or use.
b
This instruction manual is an integral part of the
product. It must be kept safe and must ALWAYS
accompany the product, even if it is sold to another
owner or transferred to another user or to another
installation. If you damage or lose this manual,
order a replacement immediately from your local
THERMITAL
Technical Assistance Centre.
a
Always turn the electrical power supply OFF at the
main switch before commencing any cleaning or
maintenance.
a
Do not tamper with or adjust the safety or control
devices without prior authorisation and instructions
from the boiler’s manufacturer.
a
Never pull, disconnect, or twist the electrical cables
coming from the appliance even if it is disconnect-
ed from the mains electricity supply.
a
Dispose of packaging materials in compliance with
applicable standards and legislation governing the
disposal of urban, domestic and industrial waste.
a
Never switch the control panel on even for a short
period if the safety devices are not functioning cor-
rectly or have been tampered with.
a
All maintenance and repairs must be carried out by
a legally qualified heating engineer.
a
Do not use water to extinguish fire in the control
panel. Switch power OFF at the mains power switch
to isolate the control panel electrically first. Then
use a class E fire extinguisher (marked “SUITABLE
FOR LIVE ELECTRICAL ITEMS”) to extinguish the
flames.
GENERAL SAFETY INFORMATION
PRECAUTIONS