Riello UPS NetMan 204, Инструкция по установке и эксплуатации

Страница: 13 / 52

- 13 -
CONFIGURATION
O
VERVIEW
NetMan 204 can be configured via USB, via SSH or via HTTP.
NetMan 204 comes provided as factory default with DHCP enabled and with the following
services active: SSH, HTTP, SNMP, UDP and FTP.
In order to change the configuration of NetMan 204 , you have to log in as admin (default
password
“admin”).
5
NetMan 204 needs approx. 2 minutes to become operational from when it is powered up
or after a reboot; before this time the device may not respond to commands that are sent
to it.
Configuration via HTTP/HTTPS
In order to change the configuration via http/https, you have to insert in your web browser the
hostname or IP address of the
NetMan 204 and then log in as admin (default password: "admin").
The HTTPS service uses TLS (transport layer security) in order to provide cryptographic
security. However, the certificate used is self-signed and therefore the web browser may
prompt a security alert; in this case you can ignore the alert and proceed with the
configuration of
NetMan 204 .
Once login has been effected, you can browse through the menus to configure the
NetMan 204 .
In order to make a new configuration effective, it is necessary to save it. Some changes
are applied immediately, while other require a reboot of the
NetMan 204 (as required with
a pop-up by your web browser).