Riello UPS MASTER HP-UL Series, Руководство пользователя

Страница: 30 / 84

page 30 / 84 0MLMHTM30RUENUA
NOTE:
Aux signals isolation board allows receiving external auxiliary contacts and keeping them isolated
from the UPS internal circuits making easier connections in case of paralleling of the units.
Jumpers AUX (SWBATT, SWMB, SWOUT) must be connected to the terminal of the board if no external auxiliary
contacts are presents.
Connector J1 of Aux signals isolation board
PIN NAME TYPE FUNCTION
1 AUX SWBATT INPUT
Normally open: contact used to indicate when
SWBATT is closed
2 AUX SWBATT RETURN INPUT
3 AUX SWMB INPUT
Normally close: contact used to indicate when the
SWMB EXT is closed
4
AUX SWMB RETURN INPUT
5 AUX SWOUT INPUT
Normally open: contact used to indicate when the
SWOUT EXT is closed
6 AUX SWOUT RETURN INPUT
7
BAT. TEMP. SENSOR INPUT
temperature ambient from battery cabinet
8 BAT. TEMP. SENSOR INPUT
9 GROUND INPUT Cable shield to ground
Terminal block
PIN NAME TYPE FUNCTION
1
SWBATT coil OUTPUT
Normally open dry contact: used in a circuit at
24Vdc for supply SWBATT coil.
2 SWBATT coil OUTPUT
Torque specifications for connector J1 on aux signals isolation board
AWG Wire size
range
Torque Load
#30 -12AWG 0.37 – 0.44 lbf-ft 0.5 – 0.6 Nm
Torque specifications for terminal blocks on customer interface board
AWG Wire size
range
Torque Load
#22 -12AWG 4.4 lbf-ft 6 Nm