6194
1
GB
INDEX
1.
BURNER DESCRIPTION
Two stage heavy oil burner.
1.1
EQUIPMENT
Flexible tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 2
Nipples . . . . . . . . . . . . . . . . . . . . . . . . No. 2
Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .No. 2
Screws . . . . . . . . . . . . . . . . . . . . . . . . . No. 4
Flange shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .No. 1
Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . No. 2
Guide extensions (for the lengthened head version) .No. 2
Gasket . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Fitting for operation with emulsified fuel
oil (see page 9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .No. 1
1.
BURNER DESCRIPTION . . . . . . . . . . . . . . 1
1.1
Equipment . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.
TECHNICAL DATA . . . . . . . . . . . . . . . . . . 2
2.1
Technical data . . . . . . . . . . . . . . . . . . . . . . 2
2.2
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . 2
2.3
Field of operation . . . . . . . . . . . . . . . . . . . . 2
3.
INSTALLATION . . . . . . . . . . . . . . . . . . . . . 3
3.1
Fuel oil supply systems . . . . . . . . . . . . . . . . 3
3.2
Electrical system . . . . . . . . . . . . . . . . . . . . 4
3.3
Electrical connections . . . . . . . . . . . . . . . . 5
4.
OPERATION . . . . . . . . . . . . . . . . . . . . . . . 6
4.1
Choice of nozzles . . . . . . . . . . . . . . . . . . . 6
4.2
Pump pressure . . . . . . . . . . . . . . . . . . . . . 6
4.3
Combustion head setting. . . . . . . . . . . . . . . . 6
4.4
Adjustment of the air damper motor . . . . . . . 6
4.5
Air pressure switch . . . . . . . . . . . . . . . . . . . . 7
4.6
Atomisation temperature adjustment . . . . . . . 7
4.7
Start-up programme . . . . . . . . . . . . . . . . . . . 9
4.8
Ecological oil burners . . . . . . . . . . . . . . . . . . 9
4.9
Emulsified fuel oil functioning . . . . . . . . . . . . 9
4.10 Start-up programme diagnostics . . . . . . . . . 10
4.11 Operating fault diagnostics . . . . . . . . . . . . . 10
2893
O
The burner meets protection level of IP 40, EN 60529
O
Burner with CE marking in conformity with EEC directives: EMC 89/336/EEC, Low Voltage
73/23/EEC and Machines 98/37/EEC .
1
- Suction line
2
- Return fitting
3
- Pump pressure regulator
4
- Manometer fitting(G1/8)
5
- Vacuometer fitting (G1/2)
6
- Air damper opening motor
7
- Control box reset push-button
and lock-out light
8
- Fan overload cutout reset
9
- Regulating screw for combustion head
10
- Double filter
11
- Valve group
12
- Manometer with protection valve
13
- Adjustment thermostat
14
- Pre-heater contact maker
15
- Ignition transformer
16
- Terminal board
17
- Cable glands
18
- Antigas valve
19
- Thermometer
20
- Pump motor starter with reset
21
- Air pressure switch
Fig. 1
