RIEJU Nuuk, Руководство по ремонту

Страница: 15 / 48

Diagnosis Software
15
 Software appearance and description
The application is tabbed into a “system” tab [1] and four “component” [2] tabs.
Via the connect and disconnect button [3] a connection to a Bosch 48V central
drive system can be established and terminated.
The “system view” [1] contains general information about the connected system,
allows editing of configuration values [11-14] and selection of system firmware
update containers [4]. Additionally the user is able by pressing the report button
[5] to generate a diagnostic report for the connected system. To trigger a
configuration/firmware update [6] and setting the application language [7]
(currently English only) the user may press the corresponding buttons. Clicking
on the “Info” button [8] will open up a window with information about application
version and support contacts. The status bar [9] informs the user about running
action status. Errors of failed actions will be indicated in red in the status result
area on the applications bottom [10].
The current vehicle identification number (VIN) will be shown [11].
The “Maximum number of batteries” setting [12] is editable in OEM mode only.
The “Maximum charging current” setting [13] can be changed in order to comply
with regional limitations in order not to overheat AC outlets.
The “Odometer” field [14] shows the total distance of the connected drive
system. Resetting or reducing the value will be refused by the target ECUs.
1
2
2
2
2
3
4
5 6 7 8
9 10
11
12
13
14