Fig. 37
A
B
Fig. 37a
Fig. 37b
R
V
P
5.14 LIGHTS
5.14.1 HEADLIGHT
•
To increase visibility at night, quartz (halogen) type headlights
are fitted.
•
Low beam / high beam (A - Fig. 37)
Halogen bulb 12V - 35/35 W (HS1)
•
Parking light bulb (B - Fig. 37)
Bulb 12V - 5W (W5W)
For information about light controls, see chap. 3.12 and 3.13
We advise you to check if the replaced bulb works prop-
erly before refitting the headlight unit definitively.
Adjusting the beam
Have the beam of the headlight periodically checked by an
Authorised
RIEJU
Service Centre.
To check/adjust the beam, proceed as follows:
•
put the vehicle in running conditions at 10 metres from a wall.
•
Turn on the low beam headlights and keep the vehicle bal-
anced without a stand (lean it against a wall for instance).
•
Remove the front air intake (P – Fig. 37a) by loosening the 2
fixing screws (V – Fig. 37a) of the light to adjust.
•
With the aid of a screwdriver, turn the screw for adjusting the
projector (R - Fig. 37b), bearing in mind that turning clock-
wise lowers the beam and vice versa
•
Adjust one light at a time, whilst covering the other.
Adjust the beam so that its bottom line projected on the wall is
at about 73 cm from the floor.
•
Refit the front air intake.
4
5
6
english
42
1
3
2
