Riedel NSA-002A, Руководство пользователя

Страница: 14 / 28

14
NSA-002A User Manual A00
3.4 Operation Mode
The NSA-002A supports two operating modes:
·
Bolero (plug-and-play mode for Bolero wireless intercom systems)
·
Manual
The operation modes can be switched by pushing the mode button for more than 5 seconds.
The active mode is indicated by the upper device mode LED (blue: Bolero, violet: Manual).
NSA-002A currently does not support the PTP hybrid mode offered by Director for panels. This
could cause PTP traffic overload in networks with many PTP slaves. Riedel has successfully tested
connecting NSA-002A into networks with up to 32 slaves, so this should be your maximum
number of Artist AES67-108 cards, RSPs, NSAs or other 3rd party AES67 devices. To overcome this
value, implementation of boundary clock switches is recommended.
Bolero-Mode
The Bolero mode is used to easily adapt analog audio signals into Bolero networks.
·
Connect a NSA-002A direct or via switch to the AES67/Config port of the Bolero Antenna.
·
One additional NSA-002A may daisy chained via the internal switch if the NSA-002A is directly connected
to a Bolero Antenna.
·
Max. twice as many NSA-002A as Bolero Antennas in a network.
·
PC may connected to the second Ethernet port of the NSA-002A.
·
Plug-and-play connection (no IP configuration required).
·
Each NSA has six 4-wires and three GPIOs:
o
6 Line in
o
6 Line out
o
3 GPIs
o
3 GPOs
·
The signals are available on each antenna.
·
The Beltpacks can trigger GPIOs.
·
Configuration via Bolero web interface.
figure 15: Bolero-Mode