Quick Guide
Thank you for choosing a RIEDEL product.
This Quick guide helps you to connect the CONNECT Solo to an Artist System.
For further information please read the CONNECT Solo Hardware/Software Manual and the DIRECTOR Software Manual.
Safety Instructions
- Do not cover the holes in the top of the codec.
- Do not use faulty power supplies or damaged power cables.
- The codec is designed for a dry and clean environment, do not expose to rain or other liquids.
Mounting
The codec can be used as a desk top device or mounted in a 19” frame.
In the last case assemble the 19” rack mount kit for the codec (or the optional available 19” kit for two codes in 1 RU)
with the codec. Make sure that all screws are well tightened.
Display
Softkeys Navigation
buttons
Confirm entry/
Status window
Keypad
Drop/
Main menu
Establish connection
Accept call
B channel shift
(only ISDN)
Earthing
AES/EBU Input
AES/EBU Output
POTS
Interface
Power Supply
Input
Analog Input
Analog Output
Telephone
Interface
Operational elements on the front side
Elements on the rear side
Riedel Communications GmbH
|
Uellendahler Straße 353
|
42109 Wuppertal, Germany
Phone: +49 (0) 202 292 - 90
|
Fax: +49 (0) 202 292 - 99 99
|
www.riedel.net
Riedel Communications GmbH
|
Uellendahler Straße 353
|
42109 Wuppertal, Germany
Phone: +49 (0) 202 292 - 90
|
Fax: +49 (0) 202 292 - 99 99
|
www.riedel.net
