Rieco-Titan Products OSI-433N, Руководство по установке

Страница: 8 / 15

8
ELECTRICAL INSTALLATION ( continued )
13. To ensure that your operating signal of the system is secure, both the transmitter and the receiver control box
have identical 7 actuator, 21 position code switches. You may want to change the codes on the switches. The
actuators must be set to match each other in both the transmitter and the receiver control box. The 21
possible positions provide you with about 1.5 million combinations, so the odds of having the same code as
someone nearby are almost impossible, after you have changed the codes. Follow the instructions on the next
page.
Fig. 3
Use #8 AWG wire between receiver control box & battery.
Use #10 AWG wire between receiver and jacks.
IN ORDER TO OPERATE THIS ELECTRIC JACK SYSTEM, IT IS NECESSARY TO INSTALL A
HEAVY DUTY MARINE/RV BATTERY WITH PROVISION TO KEEP THE BATTERY
CHARGED. LOCATE IT IN A SEPARATE SITE, BUT NEAR THE RECEIVER.
Revised 7-10-09
pantherRVproducts