Safety instructions
12
Rieber GmbH & Co. KG
3.6.4
Risks due to trapped moisture and mould formation
Water jet can wet insulation materials on the side, which would impair the insulation effect; mould
formation, unpleasant odours etc. could result.
TWF-C 3.0, TWF-C 3.0-PK, TWF-AK may only be wiped down with a moist cloth.
Do not expose to water jets.
In the event of moisture damage, dry the appliance in the heating cabinet if
necessary.
Maximum permissible temperature
+45 °C
.
In the event of mould formation, lock the appliance and arrange for a hygiene
specialist to carry out the necessary measures.
Take suitable measures against human error, for example against the risk of
confusing appliances with each other, as when cleaning.
‘Operator's duties’, page 8
3.6.5
Risks of slipping/falling
!
→ Applies to types TWF-C 3.0-PK
Collection tank for condensation
Slipping hazard. Risk of falling. Empty the
collection tank
for condensation in due
time.
The device can be brought to the right temperature in advance in a cold chamber or
heat cabinet, between
+2 °C
and
+45 °C
. Do not allow it to go below
+2 °C
.