Cleaning, maintenance and care
44
Rieber GmbH & Co. KG
# Installing the registers and the core temperature sensor
4x
4x
4x
CAUTION
If installed incorrectly, the plates at the bottom of the register may be bent, so that the
register would have to be replaced.
An unplugged dummy connector may be damaged or pulled off when installing the
register. If the connector is not inserted, liquid or objects such as particles of dirt may enter
the receptacle.
►
Insert the dummy connector into the receptacle provided.
►
Mount the register evenly on the inside at the top edge with both hands. Pay
attention to the
front closure of the inside of the housing and the register
.
►
Then push the long side of the register into the interior until you feel the end stop.
▌
The guide is smooth-running. The register is guided back at a slight angle.
The 4x guide bolts hold the register.
# Clean core temperature sensor
WARNING
Risk of stab wounds when handling the pointed core temperature sensor.
►
Be careful.
Mild
washing up detergent diluted in hot water is ideal for cleaning. After cleaning, rub surfaces
dry with a
soft cloth
.
# Finally insert the registers and core temperature sensor into the navioven
See ‘Installing the registers and the core temperature sensor, page 44
