Rieber navioven, Руководство по эксплуатации

Страница: 24 / 52

Use
24 Rieber GmbH & Co. KG
7.9 How to switch off the navioven

Press the STOP button (11) and hold for around 5 seconds: Back to program
selection.
▌
The currently running program is cancelled.

Press the STOP button again and hold for around 5 seconds.
▌
The appliance switches to Standby mode.
▌
The current chamber temperature appears in the display.
 Turn the dial (4) to the POWER ON setting .
▌
The readings in the display disappear.
 Disconnect the electrical connector from the mains if necessary.
Cancel program with real time function
See
‘
Unlock the control in real time mode
’,
page 33
7.10 Operation of the navioven function keys
 Turn the dial (4) until the display for the desired program lights up.

Press the dial , to open the desired program.
▌
The LEDs on the function keys flash.
 Use the function keys to set chamber temperature, core temperature, time and
humidification, depending on the desired program.
▌
The LEDs on the function keys flash.
Chamber temperature function key
Query current chamber temperature
▌
The current temperature is shown in the display, if no other function key
has been pressed.
Query set chamber temperature
 Press the Chamber temperature function key (10).
▌
The set temperature is displayed.
▌
After about 10 seconds, the current chamber temperature is shown again
in the display.
Set required chamber temperature
 Press and hold down the Chamber temperature function key .
 Set the required chamber temperature by turning the dial (4).

Release the Chamber temperature function key .