Use
Rieber GmbH & Co. KG
21
7.3
Banquet trolley with water container for warm food
Prepare
1
Close drainage cock. See underside.
Remove lid from water container, fill with
around 1.5 litres of water
.
Put lid on.
Make sure that there is always water in the water container when using the humidity
function.
Top up the water regularly if required
.
▌
No error message is issued if there is no water in the tank.
Switching on the appliance
Turn the appliance on. Turn the green rocker switch to POWER ON (I).
▌
The green rocker switch will light up to signal that the unit is ready for
operation.
▌
The display shows the ACTUAL temperature.
To change the target temperature, keep the SET button pressed and
use buttons (
) to set the value. Release the buttons.
▌
The adjusted value is saved automatically.
▌
Appliance is heating up.
▌
The display shows the ACTUAL temperature.
After the target temperature has been reached, set the proportion of humidity or
water vapour by turning the control knob.
▌
The settings greater than '0', i.e. 1 to 3, cause increasing humidity.
Switching the unit off
Turn the circulating air intensity off, by turning the control dial to ‘0’.
Turn the appliance off electrically. Turn the green rocker switch to
POWER OFF (O).
▌
The green rocker switch will no longer light up. Empty display, no LED
will light up. The appliance is off.
Pull the electric plug and put it in the holder.
1
Humidity option