13
Hoses
(14 Foot Tug-A-Long & 7 Foot
Super Flex)
The 14 Foot Tug-A-Long Hose and the
7 Foot Super Flex Hose have an adaptor
that can be used to connect the hose to
the vacuum port on the vac or to the male
end of another hose. Both 7 foot and 14
foot hoses can be used connected togeth-
er or independently from one another.
Both the 7 foot and 14 foot hoses have a
locking adaptor at one end that will
connect to the vac, and a friction fit
at the other end, which will connect to all
the 1-7/8 inch accessories or a second
hose.
To connect these two hoses together, first
connect the 14 foot hose to the wet/dry
vac. Next connect the 7 foot hose to the
14 foot hose by inserting the friction end of
the longer hose into the larger locking end
of the shorter hose. This will create a
friction connection.
Diffuser Cap Assembly
Connect the lanyard to the attachment tab
on the vac motor assembly to keep the
diffuser attached to vac when using the
blower port. The diffuser cap can be used
in the exhaust port of the Wet/Dry Vac.
Installing the diffuser cap will allow you to
diffuse the exhaust air in any direction and
reduce the intensity of the exhaust force.
Diffuser
Attachment Tab
Lanyard
Vacuum Inlet
Port
Tug-A-Long
Hose
Vacuum Inlet Port
Friction
End
Male End
of Hose
SP6625 5 gallon RIDGID 9/16/05 2:25 PM Page 13
