RIDGID wd1956 Скачать руководство пользователя страница 3

3

replacement parts. Read the
instructions for Servicing Double-
Insulated Wet/Dry Vacs before
servicing.

• Use only extension cords that are rated

for outdoor use. Extension cords in
poor condition or that are too small in
wire size can pose fire and shock
hazards. To reduce the risk of these
hazards when using an extension cord,
be sure it is in good condition and that
the connection does not come into
contact with liquid. To keep power loss
to a minimum, use the following table
to choose the minimum wire size
extension cord.

• To reduce the risk of injury from

accidental starting, unplug power cord
before changing or cleaning filter.

• Do not unplug by pulling on cord. To

unplug, grasp the plug, not the cord.

• Do not use with damaged cord, plug or

other parts. If your Vac is not working
as it should, has missing parts, has
been dropped, damaged, left outdoors,
or dropped into water, return it to an
Authorized Service Center.

• Do not pull or carry by cord, use cord

as handle, close a door on cord, or pull
cord around sharp edges or corners.
Do not run Vac over cord. Keep cord
away from heated surfaces.

• Do not handle plug, switch, or the Vac

with wet hands.

• Do not put any object into ventilation

openings. Do not vacuum with any
ventilation openings blocked; keep free
of dust, lint, hair or anything that may
reduce air flow.

• Keep hair, loose clothing, fingers, and

all parts of body away from openings
and moving parts.

• To reduce the risk of falls, use extra

care when cleaning on stairs.

• To reduce the risk of back injury or

falls, do not lift a Vac that is heavy with
liquid or debris.  Partially empty the
Vac by scooping or draining liquid to
make it comfortable to lift. 

• To reduce the risk of personal injury or

damage to Vac, use only Ridgid
recommended accessories.

• When using as a blower:

- Direct air discharge only at work

area.

- Do not direct air at bystanders.
- Keep children away when blowing.
- Do not use blower for any job except

blowing dirt and debris.

- Do not use as a sprayer.
- Wear safety eyewear.

• To reduce the risk of eye injury, wear

safety eyewear. The operation of any
utility Vac or blower can result in
foreign objects being blown into the
eyes, which can result in severe eye
damage.

• To reduce the risk of being struck by, or

pulled down by, a rolling Vac, block the
casters when using on any uneven or
sloped surface.

• This Wet/Dry Vac is double-insulated,

eliminating the need for a separate
grounding system. Use only identical

Extension Cord Length Gauge A.W.G.

0-50 Ft.

14

50-100 Ft.

12

Observe the following warnings that
appear on the motor housing of your Vac:

WARNING: For your own safety,

read and understand operator’s
manual. Do not run unattended.
Do not pick up hot ashes, coals,
toxic, flammable or other hazardous
materials. Do not use around
explosive liquids or vapors.

WARNING: To reduce the risk of
electric shock - do not expose to
rain - store indoors.

DOUBLE INSULATED
GROUNDING NOT REQUIRED.
WHEN SERVICING USE ONLY
IDENTICAL REPLACEMENT PARTS.

!

SAVE THIS MANUAL

CAUTION: 

• To reduce the risk of hearing damage,

wear ear protectors when using for
extended hours using in a noisy area.

• For dusty operations, wear dust mask.

NOTE: Static shocks are common

in

dry areas or when the relative humidity of
the air is low.  Vacuuming fine debris with
your Vac can deposit static charge on the
hose or on the Vac. The best remedy to
reduce the frequency of static shocks in
your home or when using this Vac is to
add moisture to the air with a humidifier.

!

SP6672-3ES 0408.qxd  4/23/08  7:27 AM  Page 3

Содержание wd1956









































Отзывы: