Wet/Dry Vac Assembly
1. Position the powerhead assembly on
the drum/caddy assembly as shown
(assembled earlier).
2. Rotate both latches down and press
until you hear them snap over the
flanges on the drum.
Drum
Latch
Drum
Latch
Drum
Flange
Latch
Drum
Powerhead
Assembly
Insert Hose
Insert the push button end of the “Dual-
Flex™ Locking” hose into the inlet of the
Vac. The hose should snap into place.
To remove the hose from the Vac, press
the release button in the hose assembly
and pull the hose out of the Vac inlet,
as shown.
Release
Button
Press
and
Pull
Tote Snaps
Tote
Straps (4)
Handle
Installing Tool Holder
Install tool holder as shown with
extension wand holders facing unit.
Drum/Caddy Assembly (continued)
49
SP6825 WD1855BR0 60 Liter PSE 4/20/12 8:57 AM Page 49