Ridge Tool Company
3
SeeSnake
®
microDrain™ Inspection System
do the job better and safer at the rate for which it is de-
signed.
•
Do not use equipment if the switch does not turn it
ON and OFF.
Any equipment that cannot be con-
trolled with the switch is dangerous and must be re-
paired.
•
Disconnect the plug from the power source and/or
the battery pack from the equipment before making
any adjustments, changing accessories, or storing.
Such preventive safety measures reduce the risk of in-
jury.
•
Store idle equipment out of the reach of children
and do not allow persons unfamiliar with the equip-
ment or these instructions to operate the equip-
ment.
Equipment can be dangerous in the hands of
untrained users.
•
Maintain equipment.
Check for misalignment or bind-
ing of moving parts, missing parts, breakage of parts
and any other condition that may affect the equip-
ment’s operation. If damaged, have the equipment
repaired before use. Many accidents are caused by
poorly maintained equipment.
•
Use the equipment and accessories in accordance
with these instructions, taking into account the
working conditions and the work to be performed.
Use of the equipment for operations different from
those intended could result in a hazardous situation.
•
Use only accessories that are recommended by
the manufacturer for your equipment.
Accessories
that may be suitable for one piece of equipment may
become hazardous when used with other equipment.
•
Keep handles dry and clean; free from oil and
grease.
Allows for better control of the equipment.
Service
•
Have your equipment serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the equipment is main-
tained.
Specific Safety Information
WARNING
This section contains important safety information
that is specific to this equipment.
Read these precautions carefully before using the
SeeSnake
®
microDrain™ Inspection System to re-
duce the risk of electrical shock, fire or other se-
rious personal injury.
SAVE THESE INSTRUCTIONS!
Keep this manual with the equipment for use by the oper-
ator.
If you have any question concerning this Ridge Tool
product:
• Contact your local RIDGID distributor.
SeeSnake microDrain Inspection System
Product Safety
•
An improperly grounded electrical outlet can cause
electrical shock and or severely damage equip-
ment.
Always check work area for a properly grounded
electrical outlet. Presence of a three prong or GFCI out-
let does not insure that the outlet is properly grounded.
If in doubt, have the outlet inspected by a licensed elec-
trician.
•
Do not operate this equipment if operator or ma-
chine is standing in water.
Operating machine while
in water increases the risk of electrical shock.
•
The microDrain System camera and pushrod are
waterproof. The monitor and other electrical equip-
ment and connections are not.
Do not expose the
equipment to water or rain. This increases the risk of
electrical shock.
•
Do not use where a danger of high voltage contact
is present.
The equipment is not designed to pro-
vide high voltage protection and isolation.
•
Read and understand this operator’s manual, the
monitor operators’ manual, and the instructions for
any other equipment in use before operating the
microDrain System.
Failure to follow all instruction
may result in property damage and/or serious per-
sonal injury.
•
Always use appropriate personal protective equip-
ment while handling and using equipment in drains.
Drains may contain chemicals, bacteria and other sub-
stances that may be toxic, infectious, cause burns or
other issues. Appropriate personal protective equip-
ment always includes safety glasses, and may include
equipment such as drain cleaning gloves or mitts, latex
or rubber gloves, face shields, goggles, protective
clothing, respirators and steel toed footwear.
•
If using drain cleaning equipment at the same time
as using drain inspection equipment, only wear
www.
GlobalTestSupply
.com
Find Quality Products Online at:
