RIDGID RV2400A, Руководство пользователя

Страница: 15 / 68

Push/Pull Handle
Cord Wrap
Power
Cord
Accessory and Storage
Extension
Wand
Storage
Extension
Wand
Accessory Storage Compartment
Your accessories may be stored in the
removable tote, or in the two locations on the
caddy right/left. The hose may be stored by
wrapping it around the unit and placing each
end into the two areas marked Hose Storage.
NOTE:
Insert male end of extension wand
into the holder sleeve as shown.
The hose may be stored by wrapping it
around the unit and plugging the open end
into one of the storage locations on the
caddy assembly.
Hose Storage
Area
HOSE
STORAGE
HOSE
STORAGE
Cord Wrap
When vacuuming is complete, unplug the
cord and wrap it around the power
assembly as shown. The cord should wrap
under the pull handle (above the inlet) and
around and under the cord wrap of the
motor cover.
15
Maintenance
WARNING: To reduce the risk of
injury from accidental starting,
unplug power cord before changing
or cleaning filter.
RV2400A/RV2600B Wet/Dry Vacs are
supplied with RIDGID’s Three Layer Fine
Dust Filter. Replacement Three Layer Fine
Dust Filters are available where you
purchased your vac. Ask for the RIDGID
Three Layer Fine Dust Filter VF5000.
NOTE:
The filter is made of high quality
paper designed to stop very small
particles of dust. The filter can be used for
wet or dry pick up. Handle the filter
carefully when removing to clean or
installing it. Creases in the filter pleats may
occur from installation but not affect the
performance of the filter.
Removal
To remove the filter for cleaning or
replacement, unscrew the filter nut from
the filter cage, remove filter plate and lift
off filter.
IMPORTANT:
To avoid damage to the
blower wheel and motor, always reinstall
the filter before using the vac for dry
material pick-up.
Dry Filter
NOTE:
For best cleaning results due to
accumulated dust, clean the filter in an
open area. Cleaning SHOULD be done
outdoors and not in the living quarters.
Filter
WARNING: Do not operate the
Wet/Dry Vac with the filter cage and
float removed. The float prevents
water from entering the impeller and
damaging the motor. The cage
prevents fingers from touching the
moving impeller.
SP6636 1/10/07 9:52 AM Page 15