RIDGID RT12000 Скачать руководство пользователя страница 16

        WARNING

SERVICING OF DOUBLE-INSULATED WET/DRY VAC

In a double-insulated Wet/Dry Vac, two systems of insulation are provided 
instead of grounding. No grounding means is provided on a double-insulated 
appliance, nor should a means for grounding be added. Servicing a double-
insulated Wet/Dry Vac requires extreme care and knowledge of the system, 
and should be done only by qualified service personnel. Replacement 
parts for a double-insulated Wet/Dry Vac must be identical to the parts 
they replace. Your double-insulated Wet/Dry Vac is marked with the words 
“DOUBLE INSULATED” and the symbol         (square within a square) may 
also be marked on the appliance.

To reduce the risk of injury from electrical shock, unplug power cord before 
servicing the electrical parts of the Wet/Dry Vac.

!

12 U.S. Gallon (45 Liter) 

Wet/Dry Vac

Model Number RT12000

!

WARNING: To reduce the risk of injury from electrical shock, unplug power
cord before servicing the electrical parts of the Wet/Dry Vac.

!

WARNING: All disassembly and repairs should be performed by qualified
personnel.

REPAIR PARTS

This product has a 90 day Satisfaction Guarantee Policy 

as well as a Limited Lifetime Warranty. 

Form No. SP7054 

Printed in Mexico  08/18

©

 

2018 Emerson

Part No. SP7054 

SP7054 RT12000.indb   16

9/5/18   12:04 PM

99 Washington Street 
Melrose, MA 02176 
Phone 781-665-1400
Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

Содержание RT12000

















Отзывы: