RIDGID RE 6, Руководство пользователя

Страница: 7 / 65

Figure 1 – RE 6 Electrical Tool
Figure 2 – LED Diagnostic Display
Specifications
RE 6 and RE 60 Electrical Tools:
RE 6 RE 60
Piston Force ...............13,500 lbf 60kN
6-ton 6-ton
(60kN)
(13,500 lbf)
Piston Travel ..............1.26" 24mm
(32mm) (0.94")
QCS Type ..................6T QCS 60kN QCS
Duty Cycle.................. 3 Cycles per minute
Motor
Voltage ...................18V DC
Amperage ...............18 Amp
Power .....................324 Watts
Battery........................18V Li-Ion, Rechargeable
Battery
Operating Temperature
Range ...........................15° F to 122° F (-10° C to 50° C)
Sound Level ................92 dBa
Vibration ......................59 in/s 2 (1.5 m/s 2 )
Weight (with Battery)...6.41 lbs (2.91 kg)
Electric Tool serial number plate is located on the rear of
the tool
(Figure 3). The first 4 digits indicate the year
and month of the manufacture. (12 = year, 06 = month).
Figure 3 – Machine Serial Number
Standard Equipment
The Electrical Tool, if ordered with batteries, comes with
2.0Ah batteries. 4.0Ah batteries are available as acces-
sories
(See Accessories). Higher amp hour batteries
allow more tool cycles per charge, but also weigh more.
The RIDGID ® Model RE 6/RE 60 Electrical Tool comes
with the following:
• RIDGID ® Model RE 6/RE 60 Electrical Tool
• Operator’s Manual
Selection of appropriate materials and joining
methods is the responsibility of the system designer
and/or installer. Before any installation is attempted, care-
ful evaluation of the specific service environment, includ-
ing chemical environment and service temperature, should
be completed. Consult connector manufacturer for selec-
tion information.
Electromagnetic Compatibility
(EMC)
The term electromagnetic compatibility is taken to mean
the capability of the product to function smoothly in an
environment where electromagnetic radiation and elec-
trostatic discharges are present and without causing elec-
tromagnet interference to other equipment.
The RIDGID ® Model RE 6 and RE 60 Electri -
cal Tools conform to all applicable EMC standards.
However, the possibility of it causing interference in other
devices cannot be precluded. All EMC related standards
that have been tested are called out in the tool's technical
document.
5
RE 6/RE 60 Electrical Tool
NOTICE
Battery
Fabric Loop
Pressure
Release
Button
NOTICE
LED
Work
Light
Run
Switch
QCS Sleeve
Warning Labels
LED
ON/OFF
Button
ON/OFF
Button
QCS Type
Label
www.tiendaisso9000.com / www.isso9000.com.mx