background image

3

GENERAL SAFETY RULES

WARNING!

Read all instructions. Failure to follow all instruc-
tions listed below may result in electric shock, fire 
and/or serious injury. The term “power tool” in all 
of the warnings listed below refers to your mains-
operated  (corded)  power  tool  or  battery-operated 
(cordless) power tool.

SAVE THESE INSTRUCTIONS
WORK AREA

 

Keep work area clean and well lit. Cluttered or dark areas 
invite accidents.

 

Do not operate power tools in explosive atmospheres, 

such as in the presence of flammable liquids, gases or 

dust. Power tools create sparks which may ignite the dust 
or fumes.

 

Keep children and bystanders away while operating a 

power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

 

Power tool plugs must match the outlet. Never modify 
the plug in any way. Do not use any adapter plugs with 
earthed (grounded) power tools.
 Unmodified plugs and 
matching outlets will reduce risk of electric shock.

 

Avoid body contact with earthed or grounded surfaces 
such as pipes, radiators, ranges and refrigerators.
 There 
is an increased risk of electric shock if your body is earthed 
or grounded.

 

Do not expose power tools to rain or wet conditions. 
Water entering a power tool will increase the risk of electric 
shock.

 

Do not abuse the cord. Never use the cord for carrying, 
pulling or unplugging the power tool. Keep cord away 
from heat, oil, sharp edges or moving parts.
 Damaged 
or entangled cords increase the risk of electric shock.

 

When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. 
Use of a cord suitable 
for outdoor use reduces the risk of electric shock.

 

Use battery only with charger listed.

 

MODEL  BATTERY PACK 

CHARGER

 

R8804

 

(18V) 130254007 

(18V) 140276003,  

 

 

 

140276004 (R84009)

 

 

(24V) 130377001 

(24V) 140315001

 

 

(R85008) 

(R85009)

PERSONAL SAFETY

 

Stay alert, watch what you are doing and use common 
sense when operating a power tool. Do not use a power 
tool while you are tired or under the influence of drugs, 
alcohol or medication.
 A moment of inattention while oper-
ating power tools may result in serious personal injury.

 

Use  safety  equipment.  Always  wear  eye  protection. 
Safety equipment such as dust mask, non-skid safety shoes, 

hard hat, or hearing protection used for appropriate condi-
tions will reduce personal injuries.

 

Avoid accidental starting. Ensure the switch is in the off-
position before plugging in. 
Carrying power tools with your 
finger on the switch or plugging in power tools that have the 
switch on invites accidents.

 

Remove any adjusting key or wrench before turning the 
power tool on.
 A wrench or a key left attached to a rotating 
part of the power tool may result in personal injury.

 

Do not overreach. Keep proper footing and balance at 
all times. 
This enables better control of the power tool in 
unexpected situations.

 

Dress properly. Do not wear loose clothing or jewelry. 
Keep your hair, clothing and gloves away from moving 
parts.
 Loose clothes, jewelry or long hair can be caught in 
moving parts.

 

If devices are provided for the connection of dust extrac-
tion and collection facilities, ensure these are connected 
and properly used.
 Use of these devices can reduce dust-
related hazards.

 

Do not wear loose clothing or jewelry. Contain long hair. 
Loose clothes, jewelry, or long hair can be drawn into air 
vents.

 

Do not use on a ladder or unstable support. Stable footing 
on a solid surface enables better control of the power tool 
in unexpected situations.

POWER TOOL USE AND CARE

 

Do not force the power tool. Use the correct power tool 
for your application.
 The correct power tool will do the 
job better and safer at the rate for which it was designed.

 

Do not use the power tool if the switch does not turn it 
on and off.
 Any power tool that cannot be controlled with 
the switch is dangerous and must be repaired.

 

Disconnect the plug from the power source and/or the 
battery pack from the power tool before making any 
adjustments, changing accessories, or storing power 
tools. 
Such preventive safety measures reduce the risk of 
starting the power tool accidentally.

 

Store idle power tools out of the reach of children and 
do  not  allow  persons  unfamiliar  with  the  power  tool 
or these instructions to operate the power tool.
 Power 
tools are dangerous in the hands of untrained users.

 

Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other 
condition that may affect the power tool’s operation. 
If damaged, have the power tool repaired before use. 
Many accidents are caused by poorly maintained power 
tools.

 

Keep cutting tools sharp and clean. Properly maintained 
cutting tools with sharp cutting edges are less likely to bind 
and are easier to control.

Содержание R8804





















Отзывы:

Похожие инструкции для R8804