RIDGID R84088, Руководство оператора

Страница: 6 / 24

6 - English
OPERATION
NOTE: When the battery charge is low, the speaker will say
“Battery Low”.
DISCONNECTING BLUETOOTH
® DEVICES:
Press and hold the BLUETOOTH
®
button for three seconds
to disconnect a paired BLUETOOTH
®
device.
ADJUSTING THE VOLUME:

To increase the volume, press the + button.

To decrease the volume, press the – button.
NOTE: Volume for any connected device can be adjusted
using the volume control for that device and/or with the +
or – buttons on the product.
PAUSE AND PLAY:

Briefly press and release the BLUETOOTH
®
button to
cycle between pausing and playing the audio.
USING A BLUETOOTH
®
ENABLED DEVICE
(NOT INCLUDED) WITH THE SPEAKER
See Figure 3, page 9.

Install a battery pack and turn the speaker on.
NOTE: The speaker will say “Power On” and automatically
attempt to connect to the last device it was paired to. If
no device has been previously paired, the will flash.

Set your device to search/scan for available BLUETOOTH ®
signals, then select “ RIDGID Speaker R84088 ” from the
list. No password or PIN is required for connection.
NOTE: For best results, BLUETOOTH
®
enabled devices
should be within 50 ft. of the speaker and set to search/
scan in order to pair with the speaker.

When the device has successfully paired with the speaker,
the speaker will say “Bluetooth Connected” and the will
turn solid.
NOTE: If the speaker does not pair with your device, turn
the power to the speaker off, wait 5 seconds, then turn
the power back on and start the pairing process again.
NOTE: When a device is paired to the speaker, information
for connecting to the device is saved in the speaker’s
memory.

To disconnect the BLUETOOTH ® enabled device, press
and hold the BLUETOOTH ® button for three seconds.
When the device is disconnected, the speaker will say
“BLUETOOTH
®
disconected”, the will flash, and the
speaker will search for a BLUETOOTH
®
signal.
NOTE: The speaker will not automatically connect to the
device it was just disconnected from.
USING THE USB DEDICATED CHARGING PORT
See Figures 4 - 5, page 9.
The USB dedicated charging port provides charging power
of 5 Volts DC at up to 2 Amp for your cell phone, MP3 player,
or other USB devices.
NOTICE:
Attempting to charge devices rated more than 2.1
Amp, such as a tablet, could damage the USB
dedicated charging port and/or the device.

Connect one end of a USB cable (not provided) to your
USB device.

Connect the other end of the USB cable (not provided) to
the USB dedicated charging port to begin charging the
device.
NOTE: The USB dedicated charging port provides
power only; it does not provide any data communication
capabilities.

The USB dedicated charging port will continue to function
as long as the speaker is on. If the speaker is off, charging
will stop.
NOTE: The speaker will turn off in 30 minutes if no audio
has been streamed. Turn the speaker on to resume
operation.
NOTE: Maintenance information begins on page 7 after French and Spanish
language sections. Illustrations start on page 8.
This product has a 90-Day Satisfaction Guarantee Policy, as well as a
Three-year Limited Warranty. For Warranty and Policy details,
please go to powertools.ridgid.com or call (toll free) 1-866-539-1710.