background image

19

WARRANTY

Proof of purchase must be presented when requesting war-
ranty service. 
Limited to RIDGID

®

 hand held and stationary power tools 

purchased 2/1/04 and after. This product is manufactured 
by One World Technologies, Inc. The trademark is licensed 
from RIDGID, Inc. All warranty communications should be 
directed to One World Technologies, Inc., attn: RIDGID Hand 
Held  and  Stationary  Power  Tool  Technical  Service  at  (toll 
free) 1-866-539-1710. 

90-DAY SATISFACTION GUARANTEE POLICY 

During the first 90 days after the date of purchase, if you are 
dissatisfied with the performance of this RIDGID

®

 Hand Held 

and Stationary Power Tool for any reason you may return 
the tool to the dealer from which it was purchased for a full 
refund or exchange. To receive a replacement tool you must 
present proof of purchase and return all original equipment 
packaged with the original product. The replacement tool 
will be covered by the limited warranty for the balance of 
the 3 YEAR service warranty period. 

WHAT IS COVERED UNDER THE 3 YEAR 
LIMITED SERVICE WARRANTY 

This warranty on RIDGID

®

 Hand Held and Stationary Power 

Tools covers all defects in workmanship or materials and nor-
mal wear items such as brushes, chucks, motors, switches, 
cords, gears and even cordless batteries in this RIDGID

® 

tool for three years following the purchase date of the tool. 
Warranties for other RIDGID

®

 products may vary. 

HOW TO OBTAIN SERVICE

To obtain service for this RIDGID

®

 tool you must return it; 

freight prepaid, or take it in to an authorized service center 
for RIDGID

®

 branded hand held and stationary power tools. 

You may obtain the location of the authorized service center 
nearest you by calling (toll free) 1-866-539-1710 or by log-
ging on to the RIDGID

®

 website at www.ridgid.com. When 

requesting warranty service, you must present the original 
dated sales receipt. The authorized service center will re-
pair  any  faulty  workmanship,  and  either  repair  or  replace 
any part covered under the warranty, at our option, at no 
charge to you.

One World Technologies, Inc.

Hwy. 8

Pickens, SC 29671

RIDGID

®

 HAND HELD AND STATIONARY POWER TOOL

3 YEAR LIMITED SERVICE WARRANTY 

WHAT IS NOT COVERED

This warranty applies only to the original purchaser at retail 
and may not be transferred. This warranty only covers de-
fects arising under normal usage and does not cover any 
malfunction, failure or defect resulting from misuse, abuse, 
neglect, alteration, modification or repair by other than an 
authorized service center for RIDGID

®

 branded hand held 

and stationary power tools. Consumable accessories pro-
vided with the tool such as, but not limited to, blades, bits 
and sand paper are not covered.  

RIDGID, INC. AND ONE WORLD TECHNOLOGIES, INC. 
MAKE  NO  WARRANTIES,  REPRESENTATIONS  OR 
PROMISES AS TO THE QUALITY OR PERFORMANCE 
OF ITS POWER TOOLS OTHER THAN THOSE SPECIFI-
CALLY STATED IN THIS WARRANTY. 

ADDITIONAL LIMITATIONS

To the extent permitted by applicable law, all implied war-
ranties, including warranties of MERCHANTABILITY or FIT-
NESS FOR A PARTICULAR PURPOSE, are disclaimed. Any 
implied warranties, including warranties of merchantability 
or fitness for a particular purpose, that cannot be disclaimed 
under state law are limited to three years from the date of 
purchase. One World Technologies, Inc. and RIDGID, Inc. 
are not responsible for direct, indirect, incidental or conse-
quential damages. Some states do not allow limitations on 
how long an implied warranty lasts and/or do not allow the 
exclusion or limitation of incidental or consequential dam-
ages, so the above limitations may not apply to you. This 
warranty gives you specific legal rights, and you may also 
have other rights which vary from state to state. 

Содержание R84001





















Отзывы: