RIDGID micro CA-300, Руководство оператора

Страница: 6 / 464

micro CA-300 Inspection Camera
4
• Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-
skid safety shoes, hard hat or hearing
protection used for appropriate condi-
tions will reduce personal injuries.
Equipment Use and Care
• Do not force equipment. Use the cor-
rect equipment for your application.
The correct equipment will do the job
better and safer at the rate for which it
is designed.
•
Do not use equipment if the switch
does not turn it ON and OFF. Any tool
that cannot be controlled with the
switch is dangerous and must be re-
paired.
•
Disconnect the batteries from the
equipment before making any ad-
justments, changing accessories, or
storing. Such preventive safety mea-
sures reduce the risk of injury.
• Store idle equipment out of the reach
of children and do not allow per-
sons unfamiliar with the equipment
or these instructions to operate the
equipment. Equipment can be danger-
ous in the hands of untrained users.
•
Maintain equipment.
Check for miss-
ing parts, breakage of parts and any
other condition that may affect the
equipment’s operation. If damaged,
have the equipment repaired before
use. Many accidents are caused by
poorly maintained equipment.
• Use the equipment and accessories in
accordance with these instructions,
taking into account the working con-
ditions and the work to be performed.
Use of the equipment for operations
different from those intended could
result in a hazardous situation.
• Use only accessories that are recom-
mended by the manufacturer for your
equipment. Accessories that may be
suitable for one piece of equipment may
become hazardous when used with oth-
er equipment.
• Keep handles dry and clean; free from
oil and grease.
Allows for better con-
trol of the equipment.
Service
• Have your equipment serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the tool is main-
tained.
Specific Safety
Information
WARNING
This section contains important safety in‑
formation that is specific to the inspection
camera.
Read these precautions carefully before
using the RIDGID® micro CA‑300 In spec‑
tion Cam era to reduce the risk of electrical
shock or other serious injury.
SAVE THESE INSTRUCTIONS!
A manual holder is supplied in the carrying
case of the micro CA-300 Inspection Camera
to keep this manual with the tool for use by
the operator.
micro CA‑300 Inspection Camera
Safety
•
Do not expose the display unit to
water or rain. This increases the risk
of electrical shock.
The micro CA-300
imager head and ca ble are waterproof
to 10’ (3 m). The hand-held display unit
is not.
• Do not place the micro CA‑300 inspec‑
tion Cam era anywhere that may con-
tain a live electrical charge.
This in-
creases the risk of electrical shock.
• Do not place the micro CA‑300 inspec‑
tion Cam era anywhere that may con-
tain moving parts. This increases the
risk of entanglement injuries.
• Do not use this device for personal
inspection or medical use in any
way. This is not a medical device. This
could cause personal injury.
• Always use appropriate personal
protective equipment while han-
dling and using the micro CA-300
inspection Cam er a. Drains and other
areas may contain chemicals, bacte-
ria and other substances that may be
toxic, infectious, cause burns or other
issues. Appropriate personal pro-
tective equipment always includes