side of the drain. Hose can whip, causing striking
injuries and spray can penetrate skin and cause
serious injury.
High pressure fluid can inject under skin resulting in
serious injury, including amputation. do not direct
spray at people or animals.
do not operate jetter above pressure rating or 60°C
(inlet water temperature). This increases the risk of
injury, including burns, and damage to the jetter.
one person must control the jetting process and
water flow. If the jetter hose comes out of the
drain, the operator must be able to shut off the
water flow to reduce the risk of the jetter hose
whipping, causing striking and high pressure injec-
tion injuries
Always use appropriate personal protective equip-
ment while handling and using drain cleaning equip-
ment. drain may contain chemicals, bacteria and
other substances that may be toxic, infectious,
cause burns or other issues. Appropriate personal
protective equipment always includes safety glass-
es and gloves, and may also include equipment
such as latex or rubber gloves, face shields, gog-
gles, protective clothing, respirators, and steel
toed footwear.
9
KJ-5000 Water Jetting Machine
If using nozzles that are not equipped with a quick
connect (such as the Macro Drain Nozzle), the female
quick connect must be removed from the end of the
hose and the nozzle securely threaded on. Stock
hoses and nozzles use BSPT threads. Make sure that
the threads match and that sealant is used to prevent
leaks.
operating Instructions
WARNING
Always wear eye protection to protect your eyes
against dirt and other foreign objects. Always wear
appropriate personal protective equipment for the
work environment.
Never operate the jetter with the hose end out-
JeTTeR HoSe SeLeCTIoN CHART
Applications
Pipe Size
Suggested Hose (ID)
Kitchen sinks, laundry tubs and stacks, clean-outs, and vents.
2" – 3"
3
/
16
" Flexible Leader (optional equipment)
Shower and floor drains, lateral lines, and grease traps.
3" – 4"
3
/
16
" Flexible Leader (optional equipment) or
1
/
4
"
Remote Reel
Sewer and storm water lines
4" – 6"
1
/
4
" Remote Reel or
3
/
8
" Primary Reel
Lateral and main lines.
6" – 10"
3
/
8
" Primary Reel
Penetrating Nozzle (Red Cowl): Uses three jet thrusters in reverse plus one jet pointed forward to pene-
trate solid grease, sludge or sediment blockages. The forward jet blasts a small hole in the blockage for
the nozzle to follow. It is also very effective when jetting ice blockages. Attaches to hose with quick con-
nect, includes cowl protection. For 3" to 6" drain sizes.
Negotiator Nozzle (Blue Cowl): Use this nozzle to help negotiate more difficult bends or gully traps as it is of
a short construction. This nozzle has three reverse jet thrusts and one forward. Attaches to hose with quick
connect, includes cowl protection. For 3" to 6" drain sizes.
Large Drain Nozzle: hard fixed end within the standard kit for work on smaller diameter pipes (3" to 4") with
tighter radiuses/bends. This nozzle is smaller in size and eliminates the quick connect to allow easier nego-
tiation around bends in the line. It has three rear jets with one facing forward for a range of applications.
Nozzle includes a
1
/
4
" BSPT thread to connect directly to hose thread.
Small Drain Nozzle: supplied with optional equipment flexible leader for smaller diameter pipes (2" to 4").
This nozzle is exceptionally small and short and has three rear jets with one facing forward for a range of
more domestic applications e.g. internal drains/pipes etc. Nozzle includes a
1
/
8
" BSPT thread to connect
directly to hose thread as supplied standard.
Reverse Root Cutting Nozzle: Use to clear roots and other type of blockages. Uses a rear facing oscillating
jet for more complete drain cleaning. Attaches to hose with quick connect. For drain sizes 4" to 10", as noted
here.
WARNING If using the Reverse Root Cutting nozzle for drains larger than 6"/150 mm and up to 10"/250 mm, an extension must
be used to reduce the risk of the nozzle changing direction in the drain, exiting at the user and causing serious injury.
JeTTeR NoZZLe SeLeCTIoN CHART
H-502
H-501
H-503
H-511
H-500
