4. Allow the tool to self-level. Mark the intersection of the plumb line and the
laser beam as “B”. No adjustment is necessary if the vertical difference
between A and B is less than 1/4” (6.5mm)
Repeat the above steps to ensure a correct reading. If the distance is greater
than 1/4”, you will need to calibrate the X axis.
Calibration- X Axis
1. Keeping the Green Auto Leveling Rotary Laser Level in its current position,
turn the power off; turn the display toward you, and make X+ facing the target
(i.e. wall, detector), as shown in Fig. 30 and Fig. 31..
2. Turn on the level and remote control, press the “
” and “
” button at
the same time to activate calibration mode.(Fig. 33a)
Fig. 32
